Breadcrumbs

[Hardware] Zebra PDA Instructions

This guide will enable you to setup your Zebra PDA to work with the Hopstack platform app. The guide consists of the two main steps:

  • Set up the PDA profile

  • Install the Hopstack app

Step 1: Set up the PDA profile

  1. Start your Zebra PDA and unlock it to the home screen.

  2. Open DataWedge.

image-20260617-161929.png


  • Swipe up from the bottom of your device screen to open the App Drawer.

  • Find and tap the DataWedge app.

  1. Select Your Profile

image-20260617-162055.png


  • On the main DataWedge Profiles screen, select the profile you are using (usually Profile0, which is the default profile for general scanning).

  • Ensure the profile is enabled (the checkbox next to Profile enabled must be checked


  1. Enable Send Enter Key

  • Scroll down to the Keystroke Output section and ensure it is checked/enabled.

  • Tap on Basic data formatting.

  • Locate the Send ENTER key option and check the box to enable it.

  • Press the back button to exit the DataWedge application. The settings will save and apply automatically to all your scans

image-20260617-162239.png

  • Basic data formatting.

image-20260617-162327.png


  • Send ENTER key option and check the box to enable it.

image-20260617-161545.png

  1. Go back to the previous screen and exit the DataWedge app.

Step 2: Install the Hopstack App


  1. Download the Hopstack Mobile App via the Play Store.

image-20260617-155352.png

  1. Install the app

  2. Tap Install and wait for the installation to finish.

  3. Open the “Hopstack” app.

  4. Update your domain

image-20260617-155737.png

  1. Enter the credentials

  2. Tap Log In.

image-20260617-160017.png

If you encounter any issues or have questions, don't hesitate to get in touch with Hopstack support.